Canon imageRUNNERC1022 Service Manual page 148

Chapter 5
[2]
6) Close the ADF upper cover [1].
[1]
7) Remove the ADF unit communication cable [1].
- 1 screw [2]
- 1 connector [3]
- 1 wire saddle [4]
8) Disconnect the 2 connectors [1]. Open the connector holder [2] to discon-
5-10
[3]
[1]
F-5-16
F-5-17
[1] [3]
[2] [4]
F-5-18
nect the flat cable [3].
[3]
[2]
9) Open the ADF unit + reader unit [1].
[1]
Points to note at work
Be sure not to close the ADF unit + reader unit hastily. If closing the ADF
unit + reader unit hastily, the impact can cause damage.
Also be careful not to get your hands caught between the ADF unit + reader
unit and the host machine.
10) Remove the 2 hinge stoppers [1].
- 2 screws (binding) [2]
Points to Note When Removing the Hinge Stopper
When removing both the left and right hinge stoppers, the ADF + the reader
unit close under their own weight, in which your hand may be caught. Be
sure to perform the operation while holding them with one hand.
[1]
F-5-19
F-5-20