Canon imageRUNNERC1022 Service Manual page 273

15) Remove the spring holder [1] to remove the spring [2].
16) Remove the plate [1].
17) Remove the spring holder [1] to remove the spring [2].
18) Remove the plate [1].
19) Disconnect the connector [1].
F-10-22
F-10-23
F-10-24
F-10-25
F-10-26
20) Remove the sensor unit [1].
- 1 screw [2]
21) Remove the fixing sleeve unit [1].
22) Remove the cover [1].
- 2 claws [2]
23) Remove the PCB [1].
- 1 claw [2]
- 3 connectors [3]
Chapter 10
F-10-27
F-10-28
F-10-29
F-10-30
10-11