Canon imageRUNNERC1022 Service Manual page 300

Chapter 11
[5]
[1]
[1]
2) Remove the right frame reinforcement plate [1].
- 8 screws [2]
[1]
[2]
3) Remove the ferrite core [1].
11-18
[4]
[3]
[5]
[2]
F-11-36
[2]
F-11-37
[1]
4) Open the 4 wire saddles [1] and free the 5 harnesses [3] from the 2 harness
guide mouths [2].
[2]
[3]
Points to note at installation
Make sure to install the ferrite core [2] attached to the harness [1]
between the 2 wire saddles [3].
F-11-38
[1]
[3]
F-11-39