High-Voltage Power Supply Pcb; Before Removing The High Voltage Power Supply Pcb - Canon imageRUNNERC1022 Service Manual

Chapter 11
[2]
3) Remove the wire saddle [1] and disconnect the 4 connectors [2].
4) Move the low voltage power supply PCB [1] in the direction of the arrow,
and free the 5 harnesses [3] from the harness guide hole [2].
11-26
[2]
[1]
[2]
F-11-65
[1]
[2]
F-11-66
5) Remove the low voltage power supply PCB [1].

11.5.17 High-voltage Power Supply PCB

11.5.17.1 Before Removing the High Voltage Power
Supply PCB
imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
1) Remove the ETB unit.(page 8-30)Reference [Removing the ETB Unit]
2) Remove the rear cover unit.(page 11-12)Reference [Removing the Rear
Cover Unit]
3) Remove the left cover.(page 11-14)Reference [Removing the Left Cov-
er]
4) Remove the Electrical Components Cover.(page 11-16)Reference [Re-
moving the Electrical Components Cover]
5) Remove the Off Hook PCB. (only of the machine with FAX)(page 11-
[1]
[3]
[2]
F-11-67
[1]
F-11-68
0020-3354