Chapter 9
9) Fit the rod [1] with the cutoff of the shaft [2] to remove the rod.
10) Remove the holder [1].
- 2 screws [2]
11) Remove the plate [1].
- 1 screw [2]
12) Remove the 4 screws [1]
13) Put the right side of the host machine downward to slide the bottom plate
[1] for about 30mm from the pickup drive unit [2].
9-28
F-9-64
F-9-65
F-9-66
F-9-67
14) Remove the pickup drive unit [1].
- 2 screws [2]
15) Remove the plate [1].
- 4 screws [2]
16) Remove the manual feed pickup solenoid [1].
- 1 screw [2]
9.5.8 Manual Separation Roller
9.5.8.1 Before Removing the Manual Feed Separation
Pad
imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
1) Remove the ETB unit.(page 8-30)Reference [Removing the ETB Unit]
9.5.8.2 Removing the Manual Feed Separation Pad
imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
1) Remove the cassette.
2) Remove the manual feed separation pad [1].
F-9-68
F-9-69
F-9-70
F-9-71
0018-9210
0018-9211