Canon imageRUNNERC1022 Service Manual page 251

5) Free the cable from the cable guide [1].
6) Disconnect the 3 connectors [1].
7) Remove the cable guide [1].
- 1 screw [2]
- 2 claws [3]
8) Remove the rod [1].
- 1 claw [2]
F-9-42
F-9-43
F-9-44
F-9-45
F-9-46
9) Fit the rod [1] with the cutoff of the shaft [2] to remove the rod.
10) Remove the holder [1].
- 2 screws [2]
11) Remove the plate [1].
- 1 screw [2]
12) Remove the 4 screws [1]
13) Put the right side of the host machine downward to slide the bottom plate
[1] for about 30mm from the pickup drive unit [2].
Chapter 9
F-9-47
F-9-48
F-9-49
F-9-50
9-25