Pickup Motor; Before Removing The Pickup Motor; Removing The Pickup Motor - Canon imageRUNNERC1022 Service Manual

9.5.3 Pickup Motor

9.5.3.1 Before Removing the Pickup Motor

imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
1) Remove the ETB unit.(page 8-30)Reference [Removing the ETB Unit]
2) Remove the rear cover unit.(page 11-12)Reference [Removing the Rear
Cover Unit]
3) Remove the right cover.(page 11-12)Reference [Removing the Right
Cover]

9.5.3.2 Removing the Pickup Motor

imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
1) Open the front cover [1].
2) Remove the link [1] from the shaft [2].
3) Fit the link [1] with the cutoff of the shaft [2] to remove the link.
F-9-29
[1]
F-9-30
F-9-31
4) Free the cable from the cable guide [1].
0019-5826
0019-5829
5) Disconnect the 3 connectors [1].
6) Remove the cable guide [1].
- 1 screw [2]
- 2 claws [3]
7) Remove the rod [1].
- 1 claw [2]
Chapter 9
F-9-32
F-9-33
F-9-34
F-9-35
F-9-36
9-23