Developing Estrangement Solenoid; Before Removing The Developing Disengage Solenoid; Removing The Developing Disengage Solenoid - Canon imageRUNNERC1022 Service Manual

Move the drawer connector [1] at the right side to check that the couplings
[2] and the lock [3] of the toner cartridge for the four colors; BK, Y, C, and
M work with each other.
[3]
[2]

8.5.3 Developing Estrangement Solenoid

8.5.3.1 Before Removing the Developing Disengage
Solenoid
imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
1) Remove the ETB unit.(page 8-30)Reference [Removing the ETB Unit]
2) Remove the rear cover unit.(page 11-12)Reference [Removing the Rear
Cover Unit]
3) Remove the right cover.(page 11-12)Reference [Removing the Right
Cover]

8.5.3.2 Removing the Developing Disengage Solenoid

imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
1) Remove the claw [2] to move the cable guide [1] toward the left.
2) Remove the plate [1].
- 3 screws [2]
[1]
F-8-59
3) Disconnect the 2 connectors [1] and free the harness [4] from the harness
guide [2] and the wire saddle [3].
4) Remove the developing disengage drive unit [1].
- 3 screws [2]
0019-6128
0019-6129
5) Remove the plate [1].
- 3 screws [2]
6) Remove the 2 developing disengage solenoids [1].
- 2 screws [2]
Chapter 8
F-8-60
F-8-61
F-8-62
F-8-63
8-29