Overview/Configuration; Overview - Canon imageRUNNERC1022 Service Manual

8.1 Overview/Configuration

8.1.1 Overview

imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER C1030 / Color imageRUNNER C1030iF
The image formation system forms a toner image on paper, which is controlled by the DC controller. It consists of four toner cartridges and the ETB unit, etc.
The DC controller controls the laser scanner unit, and forms an electrostatic latent image on the photosensitive drum based on the video signal received from the
main controller. At the same time, it controls the high-voltage power PCB, makes toner adhere to the electrostatic latent image, and then transfers it on paper.
A memory tag, which saves cartridge data, is built in the toner cartridge for each color. The DC controller detects the use condition of the toner cartridge by reading/
writing the memory tag.
Main
controller
PCB
Laser scanner unit
Laser beam
DC controller PCB
Video signals
Toner cartridge
To primary
charging roller
To developing
blade
To developing
cylinder
Memory tag
Attraction roller
High-voltage power PCB
F-8-1
Pre-exposure LED
ETB unit
Chapter 8
0019-5012
8-1