Canon imageRUNNERC1022 Service Manual page 438

Chapter 18
Sub item
COM-LOG Display of a communication error log
Display the detailed result of communication test with the sales company's server used for E-RDS.
When an error occurs in communication with the sales company's server, error information is displayed.
<Log contents>
Number: No. 1 is assigned to the latest one.
Error code: 8-digit hexadecimal number
Date: Date when the error occurred
Time: Time when the error occurred
Detailed error information: 128 characters maximum
5 logs maximum
RGW-ADR Setting of the URL of the sales company's server used for E-RDS
Set the URL of the sales company's server.
Setting value: URL (incl. NULL, SJIS is not supported) (128 characters maximum)
CNT-DATE Setting of the date and time to start sending counter information to the server
Set the date and time to start sending counter information to the server using the E-RDS third-party extended function.
Refer to the date and time setting in the user mode.
(12 digits: YYYYMMDDHHMM)
YYYY: Year, MM: Month, DD: Day, HH: Hour, MM: Minute)
Setting range: 2000/1/1 00:00 to 2037/12/31 23.59
[Factory setting value/Value after RAM clearing: 000000000000]
CNT-INTV Setting of the interval for sending counter information to the server
Set the interval of sending counter information to the server using the E-RDS third-party extended function.
Setting range: 1 to 168 (Unit: 1 week)
[Factory setting value/Value after RAM clearing: 24]
STRD-POS Automatic detection of the DF stream reading CCD reading position
Execute this item after performing any of the replacement of the ADF unit, replacement of the reader unit, or RAM clearing for the scanner.
[Operation]
Å@The reading position is adjusted while the scanner continues to move by 0.1 mm.
[Time]
Å@When the lamp lights up: Adjustment time: 10 sec
When the lamp does not light up: Lamp adjustment time of 10 to 30 sec + Adjustment time of 10 sec
[Displays]
0: Operating / 1: OK / 2: NG
<ATTRACT>
Not used
<DPC>
Not used
<CST>
Not used
<CLEANING>
Not used
<FIXING>
Not used
<PANEL>
Sub item
LCD-CHK Not used
LED-CHK Not used
LED-OFF Not used
KEY-CHK Not used
<PART-CHK>
Not used
<CLEAR>
Sub item
R-CON
TEL-USER
SRVC-DAT
COUNTER
18-22
COPIER > FUNCTION > INSTALL
COPIER > FUNCTION > PANEL
COPIER > FUNCTION > CLEAR
Not used
Clearing of user data and data registered in the address book
SSSW is not cleared.
Clearing of SERVICE DATA
User data is not cleared.
Clearing of the maintenance/parts counter and mode counter to 0
Clear the counter (numerator) on the system dump list to 0.
Description
T-18-19
Description
T-18-20
Description