Related Manuals for Canon C1030
Summary of Contents for Canon C1030
- Page 1 SEND for Color imageRUNNER C1030/C1030iF SERVICE MANUAL October 29, 2010 Rev. 0 COPYRIGHT © 2010 CANON INC. CANON SEND for Color imageRUNNER C1030/C1030iF REV. 0 PRINTED IN U.S.A.
- Page 3 Canon will release technical information as the need arises. In the event of major changes in the contents of this manual over a long or short period, Canon will issue a new edition of this manual.
- Page 4 Introduction Symbols Used This documentation uses the following symbols to indicate special information: Symbol Description Indicates an item of a non-specific nature, possibly classified as Note, Caution, or Warning. Indicates an item requiring care to avoid electric shocks. Indicates an item requiring care to avoid combustion (fire). Indicates an item prohibiting disassembly to avoid electric shocks or problems.
- Page 5 Introduction The following rules apply throughout this Service Manual: 1. Each chapter contains sections explaining the purpose of specific functions and the relationship between electrical and mechanical systems with refer- ence to the timing of operation. In the diagrams, represents the path of mechanical drive; where a signal name accompanies the symbol , the arrow indicates the direction of the electric signal.
-
Page 7: Table Of Contents
Contents Contents Chapter 1 Specifications 1.1 Specifications .............................1- 1 1.1.1 Send Specifications ..............................1- 1 Chapter 2 Functions 2.1 Basic Function ............................2- 1 2.1.1 Security restrictions ..............................2- 1 2.1.2 IP address setting order ............................2- 1 2.2 New Function..............................2- 2 2.2.1 Store scanned documents in a USB memory...................... - Page 8 Contents...
-
Page 9: Specifications
Chapter 1 Specifications... - Page 11 Contents Contents 1.1 Specifications .................................1-1 1.1.1 Send Specifications ..................................1-1...
-
Page 13: Send Specifications
Chapter 1 1.1 Specifications 1.1.1 Send Specifications 0025-9530 T-1-1 Send to file server Communication Protocol FTP (TCP/IP), SMB (TCP/IP) Data Format TIFF (B&W), PDF (B&W) (OCR), JPEG (Color), PDF (Color) (Compact) (OCR) TIFF, PDF (B&W) (OCR): 100 x 100 dpi, 150 x 150 dpi, 200 x 100 dpi, 200 x 200 dpi, 200 x 400 dpi, 300 x 300 dpi, 400 x 400 dpi, 600 x 600 dpi Resolution JPEG, PDF (color) (OCR): 100 x 100 dpi, 150 x 150 dpi, 200 x 200 dpi, 300 x 300 dpi, 600 x 600 dpi... -
Page 15: Chapter 2 Functions
Chapter 2 Functions... - Page 17 Contents Contents 2.1 Basic Function................................2-1 2.1.1 Security restrictions ..................................2-1 2.1.2 IP address setting order ................................2-1 2.2 New Function .................................2-2 2.2.1 Store scanned documents in a USB memory ..........................2-2 2.2.2 Support the NTLMv2 certification .............................. 2-3 2.2.3 IEEE802.1X Settings ................................... 2-3...
-
Page 19: Basic Function
[DNS Server] in user data. - If automatic obtainment of IP Address fails or if IP Address specified at [IP Address] in user data is 0.0.0.0, IP Address can be set by either ARP method or Canon Configuration Protocol V3 method. If data of [Network setting] in user data are changed, the change becomes effective after the power is turned off and on. -
Page 20: New Function
Chapter 2 Hierarchy Protocol Protocol Outline Session layer Port-9100 Port-9100(rawTCP) Port-9100(rawTCP) Application layer This is used to print data sent to the port number 9100 of TCP. Port-9100 is available when [Use Port-9100] in user data is set to [Use] and [Port number of Port-9100] is set. -
Page 21: Support The Ntlmv2 Certification
Chapter 2 Cord Description Action #0816 You have reached the quota for the number of pages you can scan for Reset or increase the page quota or contact your system administrator. faxing. #0821 You have received data that cannot be processed (TIFF analysis Check the settings, and then ask the sender to resend the data. - Page 22 Chapter 2 Error message Cause Remedy IEEE802.1X error. The certificate is An error occurred when verifying the server certificate sent Confirm the contents of the server certificate of the RADIUS incorrect. from the RADIUS server using the CA certificate. server, as well as the CA certification registered on the machine.
-
Page 23: Chapter 3 Installation
Chapter 3 Installation... - Page 25 Contents Contents 3.1 Points to Note About Installation...........................3-1 3.1.1 Overview of the Installation Procedure ............................3-1...
-
Page 27: Points To Note About Installation
1. Using the following URL, access the LMS, and obtain the license key by following the instructions shown on the screen: http://www.canon.com/lms/license/ Memo: A license key is issued in exchange for the 16-digit number indicated on the License Access Number Certificate and the serial number of the device (e.g., ABC01234) to which the license will be registered. -
Page 29: Chapter 4 Maintenance
Chapter 4 Maintenance... - Page 31 Contents Contents 4.1 Notes when service ................................4-1 4.1.1 Secondary battery..................................4-1 4.2 Reference matter in market service..........................4-1 4.2.1 Recommended setting of system management information ......................4-1 4.2.2 Department ID Management................................ 4-1 4.2.3 Deleting All CA Certificate ................................. 4-1 4.3 Related Error code .................................4-1 4.3.1 The viewpoint of Error Codes..............................
-
Page 33: Notes When Service
Chapter 4 4.1 Notes when service 4.1.1 Secondary battery 0025-9519 Host mathine include secondary battery which backup FAX's snd Send images at the time of blackout. The external specification of this is as follows. - When a battery is cut, the image backup data for FAX and Send disappear. You can back up the image files over one hour by charging battery more than two hours. - Page 34 Chapter 4 F-4-2 F-4-3 F-4-4 F-4-5...
-
Page 35: Related Service Mode
Chapter 4 F-4-6 F-4-7 4.4 Related Service Mode 4.4.1 Management of a License 0025-5328 Overview 1. Validate an optional function which has been installed but has not been validated based on the license key issued by a license issue server (hereinafter called "LMS"). -
Page 36: Checking The License Option
Chapter 4 The BarDIMM license can be added. The PCL license can be transferred or erased. (3) PCL OFF/BarDIMM ON This condition is created when the PCL license is transferred or erased in the condition of (4). > The BarDIMM license is ON, but it is not activated. (4) PCL/BarDIMM ON The PCL license can be transferred or erased. - Page 37 Chapter 4 F-4-8...
-
Page 38: Invalidating Transfer Of A License
Chapter 4 F-4-9 A license option confirmation example To check the validation of license option, see the SPEC REPORT. The details according to the list shown below. T-4-1 Item Name License Name Status/Optional Setting Color Universal SEND BW-SEND ON/ON CL-SEND ON/ON 4.4.3 Invalidating Transfer of a License 0025-5330... -
Page 39: Erasing A License
Chapter 4 When you have entered the service mode, use the upper and lower arrow keys to display items, and press the OK key to fix the setting. (2) Display LCNS-TR by selecting Copier > Option > LCNS-TR. (3) Press the OK key and display #LMS INACTIVE. (4) Select a desired license from valid ST licenses for which 0001 is displayed, and press the OK key. - Page 40 Chapter 4 Operation Procedure (1) Enter the service mode and display the following service mode. When you have entered the service mode, use the right and left arrow keys to display items, and press the OK key to fix the setting. (2) Display LCNS-OF by selecting Copier >...
- Page 41 Oct 29 2010...