Parts Replacement Procedure - Canon imageRUNNERC1022 Service Manual

9.5 Parts Replacement Procedure

9.5.1 Pickup Feed Unit
9.5.1.1 Before Removing the Pickup Feed Unit
imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
1) Remove the ETB unit.(page 8-30)Reference [Removing the ETB Unit]
2) Remove the rear cover unit.(page 11-12)Reference [Removing the Rear
Cover Unit]
3) Remove the left cover.(page 11-14)Reference [Removing the Left Cov-
er]
4) Remove the right cover.(page 11-12)Reference [Removing the Right
Cover]
5) Remove the Front Cover Unit.(page 11-10)Reference [Removing the
Front Cover Unit]
6) Remove the Toner Cartridge.
9.5.1.2 Removing the Pickup Feed Unit
imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
1) Remove the cover [1].
- 1 screw [2]
2) Remove the 2 plates [1]
- 2 screws [2]
[1]
3) Remove the PCB cover [1]
- 2 claws [2]
[1]
[2]
F-9-21
[2]
F-9-22
[1]
0019-5825
0019-5824
4) Disconnect the 4 connectors [1].
5) Remove the relay connector [2] and the harness [3] from the harness guide
[1].
Chapter 9
[2]
F-9-23
[1]
F-9-24
[2]
9-21