Setting The Speed Or Print Side Priority - Canon CLC5151 Reference Manual

Setting the Speed or Print Side Priority

You can set whether the printer speed is the priority for your job, or whether to print on a specific
side of the paper. This is useful when you want to make one or two-sided prints on preprinted
paper (paper which has logos or patterns already printed on it) without changing the orientation
of the paper loaded in a paper source.
NOTE
When using preprinted paper (paper which has logos or patterns already printed on it) whose
orientation is important, it is recommended that you set [Print Side Priority] for the paper source which is
loaded with that paper.
1
4
2
4-52
Specifying Common Settings
Press [Common Settings]
Select [Speed Priority] or [Print Side Priority] for each paper source
press [OK].
Details of each item are shown below.
[Speed Priority]: When you feed one or two-sided prints into the machine, the method for
delivering paper inside the machine changes, and this affects the printing
speed. Therefore, to maximize the printing speed, load the paper manually
as follows:
One-Sided Prints: Load the paper face down in a paper drawer, or face up
Two-Sided Prints: Load the paper face up in a paper drawer, or face down
[Print Side Priority]: If you load paper in a paper drawer and select [Print Side Priority], no
matter whether you are printing one or two-sided prints, the side of the
paper facing up is always the one printed on first. (The side facing down is
the one printed on first for the stack bypass and paper deck.) However,
some speed will be sacrificed when printing one-sided prints.
If [Print Side Priority] is selected for a paper source, and Drawer Eligibility For APS/ADS in
Common Settings (from the Additional Functions screen) is set to 'On', the Automatic Paper
Selection and Automatic Drawer Switching settings are ignored. Also, the machine's printing
speed may become slower when you print one-sided documents.
[Paper Feed Method Switch].
into the stack bypass and the optional paper deck. The
side facing down in the paper drawer, and the side
facing up in the stack bypass and paper deck are the
sides printed on.
in the stack bypass and the paper deck. The side
facing up in the paper drawer, and the side facing down
in the stack bypass and paper deck are the first sides
that are printed on.