Canon imageRUNNERC1022 Service Manual page 340

Chapter 12
Initializing E-RDS settings
It is possible to return E-RDS Settings to factory-shipments value.
<< Initialization procedure >>
1. Start service mode.
For the procedures, see "Steps to E-RDS settings - step 1.".
2. Select [COPIER] > [Function] > [CLEAR] > [ERDS-DAT] and press [OK] button.
<< Setting values and data to be initialized >>
The following E-RDS settings, internal data, and Alarm filtering information are initialized.
- COPIER > Function > INSTALL > E-RDS
- COPIER > Function > INSTALL > RGW-ADR
- COPIER > Function > INSTALL > RGW-PORT
- COPIER > Function > INSTALL > COM-LOG
CAUTION:
In case of replacing the CA certificate file, even if initialization of E-RDS is executed, the status is not returned to the factory default.
When installing the certificate file other than the factory default CA certificate file, it is required to delete the certificate file after E-RDS initialization and install the
factory default CA certificate file.
For detailed procedures, see "Steps to E-RDS settings - step 3.".
12-26