Error Code Details - Canon imageRUNNERC1022 Service Manual

Chapter 16

16.2 Error Code Details

16.2.1 Error Code Details
imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER C1030 / Color imageRUNNER C1030iF
Code
E000 Error in start-up of fixing assembly
0000 Description
When 1 sec passed after energization of the heater, the detected temperature of the
main thermistor is not 5 deg C or more (0 deg C at power on).
Cause
Disconnection of main thermistor, disconnection of fixing heater, error in DC
controller PCB.
E001 Error in overheating of fixing assembly
0000 Description
The status where the detected temperature of the main thermistor is 225 deg C (approx.
0.84V equivalent) or more is detected for 0.5 continuous sec or more.
Cause
Error in main thermistor, error in DC controller PCB.
0001 Description
The status where the detected temperature of the sub thermistor is 245 deg C (approx.
2.12V equivalent) or more is detected for 0.5 continuous sec or more.
Cause
Error in sub thermistor, error in DC controller PCB.
E003 Error in abnormally low temperature of fixing assembly
0000 Description
The status where the detected temperature of the main thermistor is 100 deg C (approx.
2.60V equivalent) or less is detected for 0.5 continuous sec or more.
Cause
Error in low-voltage power supply PCB, disconnection of main thermistor, error in DC
controller PCB.
0001 Description
The status where the detected temperature of the sub thermistor is less than 100 deg C
(approx. 0.38V equivalent) is detected 0.5 continuous sec or more after energization
of the heater.
Cause
Error in sub thermistor, error in DC controller PCB.
E004 Error in fixing power supply drive circuit
0000 Description
Cannot detect the zero cross signal for the specified period or more.
Cause
Error in fixing control circuit block.
16-2
T-16-2
Description Action
- Check of the connector of the low-voltage power supply PCB
- Replacement of fixing sleeve unit
- Replacement of DC controller PCB
- Check of the connector of the low-voltage power supply PCB
- Replacement of fixing sleeve unit
- Replacement of DC controller PCB
- Replacement of low-voltage power supply PCB
- Replacement of fixing sleeve unit
- Replacement of DC controller PCB
- Check of the connector of the low-voltage power supply PCB
- Replacement of fixing sleeve unit
- Replacement of DC controller PCB
- Replacement of low-voltage power supply PCB
0020-4452