Installation - Canon imageRUNNERC1022 Service Manual

Chapter 2

2.2.2 Installation

imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
1) Open the front cover [1].
2) Place 2 sheets of A4 paper [1] on ETB side-by-side.
CAUTION: Points to note when installing/removing the toner
cartridge
- To protect ETB, make sure to place the paper on ETB when handing it.
- Be careful not to damage or scratch the ETB unit. (It causes a pickup
failure or lowers the print quality.
3) Hold the grip [A] and remove the Bk toner cartridge [1].
2-4
[1]
F-2-4
[1]
F-2-5
0019-0635
4) Hold the Bk toner cartridge [1] as below with both hands and shake it 5 to
6 times in the direction of the arrow to even the toner.
5) With holding the Bk toner cartridge [1], lift the tab [2] in the [A] direction
and pull it out in the [B] direction.
[2]
[B]
6) With holding the Bk toner cartridge [1], lift the tab [2] in the [A] direction
and pull out the sealing tape [3] in [B] direction.
F-2-6
[1]
F-2-7
[1]
[A]
F-2-8
[A]
[1]
[3]