29: St. Envelope Pan (Stereo Envelope Pan) - Korg TouchView Trinity Effect Manual

29: St. Envelope Pan
This stereo Pan uses the envelope generator to pan sound to the left and right. You can also control the
panning directly using a modulation source.
Stereo In - Stereo Out
Left
Right
D -mod
Pan Mode
a
Src
b EG Attack
c EG Release
Lch Start Offset
d
Destination Offset
Rch Start Offset
e
Destination Offset
Wet/Dry
f Src
Amt
a: Pan Mode
a: Src
(Stereo Envelope Pan)
D-mod
Pan Mode
EG Attack, Release
EG
EG, D-mod
None...Tempo
1...100
1...100
L, 1...99, R
L, 1...99, R
L, 1...99, R
L, 1...99, R
Dry, 1:99...99:1, Wet
None...Tempo
–100...+100
This parameter selects whether the panning effect is controlled by the Envelope
Generator, or directly by the modulation source.
With Pan Mode = EG, this parameter specifies the modulation source that starts
the envelope. This envelope generator is included in the Stereo Envelope Pan,
and is not related to the Oscillator EG, Filter EG, or Amp EG. If you select, for
example, Gate, the envelope generator will start when a note-on message is
received.
The effect is off when a value for the modulation source specified for the
Src parameter is smaller than 64, and the effect is on when the value is 64
or higher. The Envelope Generator is triggered when the value changes
from 63 or smaller to 64 or higher.

29: St. Envelope Pan (Stereo Envelope Pan)

Pan
Start Offset
Destination Offset
Pan
Switches panning mode.
When Pan Mode = EG, this selects the modulation source
that triggers the EG. When Pan Mode = D-mod, it selects
the modulation source that controls the pan.
Attack rate of Envelope Generator
Release rate of Envelope Generator.
Initial panning value for the left channel
Target panning value for the left channel
Initial panning value for the right channel
Target panning value for the right channel
Sets the balance between the effect and dry sounds.
Modulation source of effect balance
Modulation amount of effect balance
Wet / Dry
Wet / Dry
P.87
P.87
P.88
P.88
P.88
P.88
87