23: St. Bi-phase Mod. (Stereo Bi-phase Modulation)
23: St. Bi-phase Mod.
This stereo chorus effect adds two different LFOs together. You can set the Frequency and Depth parame-
ters for each LFO individually. Depending on the setting of these LFOs, very complex waveforms will
create an analog-type, unstable modulated sound.
Stereo In - Stereo Out
LFO1: Tri / Sine
LFO2: Tri / Sine
LFO Phase Sw
LFO1 Frequency [Hz]
LFO2 Frequency [Hz]
L Pre Delay [msec]
R Pre Delay [msec]
High Damp [%]
(Stereo Bi-phase Modulation)
0 degree, 180 degree
Selects LFO1 waveform.
Selects LFO2 waveform.
Switches the LFO phase difference between left and right.
Modulation source of LFO1&2 speed
Modulation amount of LFO1 speed
Modulation amount of LFO2 speed
Depth of LFO1 modulation
Modulation source of LFO1&2 modulation depth
Modulation amount of LFO1 modulation depth
Depth of LFO2 modulation
Modulation amount of LFO2 modulation depth
Left channel delay time
Right channel delay time
High range damping amount
Sets the balance between the effect and dry sounds.
Modulation source of effect balance.
Modulation amount of effect balance
Wet / Dry
Wet / Dry