Download Print this page

Korg TouchView Trinity Effect Manual Page 63

Korg music workstation drs effect guide.
Hide thumbs

Advertisement

a: AUTOFADE Src
a: Fade-In Rate
If AutoFade is selected for the LFO speed, depth of modulation, and Effect Bal-
ance, you can use the AutoFade function to apply modulation.
The AUTOFADE Src parameter selects the modulation source that triggers Auto-
Fade. The Fade-in Rate parameter specifies the rate of fade-in.
The following is an example of fade-in where the effect balance is increased
from "Dry" to "50" when a note-on message is received.
a: AUTOFADE Src = Gate1
f: Wet/Dry = Dry
f: Src = AUTOFADE
f: Amt = +50
The effect is off when a value for the dynamic modulation source speci-
fied for the AUTOFADE Src parameter is smaller than 64, and the effect is
on when the value is 64 or higher. The AutoFade function is triggered
when the value changes from 63 or smaller to 64 or higher.
Gate1 Signal
Note On
Fade-In Rate
AUTOFADE
09: St. Random Filter (Stereo Random Filter)
AUTOFADE
AUTOFADE Src=Gate1
Wet/Dry=Dry
Src=AUTOFADE
Amt=+50
All Note Off
Wet/Dry=50:50
Wet/Dry=Dry
AutoFade
59

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments:
  • DJ Snoop king Aug 25, 2018 12:37:
    I'm musician i have korg trinity plus