Korg TouchView Trinity Effect Manual: St. Random Flanger (stereo Random Flanger)

Korg music workstation drs effect guide.
Hide thumbs

Advertisement

18: St. Random Flanger (Stereo Random Flanger)

18: St. Random Flanger
This is a stereo flanger. The effect uses a step-shape waveform and random LFO for modulation, creating
a unique flanging effect.
Stereo In - Stereo Out
Left
FB Mode
(Normal/Cross)
Right
LFO: Step-Tri/Random
a
Delay Time [msec]
b
LFO Waveform
c
LFO Phase [degree]
LFO Frequency [Hz]
d
Src
Amt
LFO Step Freq (Frequency)
[Hz]
e
Amt
f
Depth
Feedback
g
FB Mode
h
High Damp [%]
i
Spread
Wet/Dry
j
Src
Amt
b: LFO Waveform
d: LFO Frequency [Hz]
e: LFO Step Freq (Fre-
quency) [Hz]
70
(Stereo Random Flanger)
Flanger
Flanger
LFO Phase
0.0...50.0msec
Step-Tri, Random
–180...+180
0.02...20.00Hz
None...Tempo
–20.00...+20.00Hz
0.05...50.00Hz
–50.00...+50.00Hz
0...100
–100...+100
Normal, Cross
0...100%
–100...+100
–Wet...–1:99, Dry,
1:99...Wet
None...Tempo
–100...+100
When Step-Tri is selected for LFO Waveform, the LFO uses a step-shape triangle
waveform. Set the LFO Frequency to the speed of the original triangle wave-
form. At this time, changing the LFO Step Freq value will modify the width of
the step.
When Random is selected for LFO Waveform, the LFO Step Freq setting will be
used as a cycle of the random LFO.
Feedback
High Damp
FB Mode
(Normal/Cross)
Delay from the original sound
Selects the LFO Waveform.
LFO phase difference between the left and right
LFO speed
P.70
Modulation source used for both LFO speed and step
speed
Modulation amount of LFO speed
LFO step speed (speed that changes in steps)
Modulation amount of LFO step speed
Depth of LFO modulation
Feedback amount
Sets the feedback routing.
Feedback damping amount in the high range
Sets the width of stereo image of effect sound.
Sets the balance between the effect and dry sounds.
P.25, 32
Modulation source of effect balance
Modulation amount of effect balance
Wet / Dry
Spread
Wet / Dry
P.70
P.32
P.69
P.32
P.65
P.70
P.65

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: