02: Stereo Limiter - Korg TouchView Trinity Effect Manual

02: Stereo Limiter

This effect is a stereo limiter. You can link left and right channels, or use each channel individually.
Stereo In - Stereo Out
Left
+
Right
a Envelope Select
b Ratio
c Threshold [dB]
d Attack
e Release
f Gain Adjust [dB]
g Side PEQ Insert
Side PEQ Cutoff [Hz]
h Q
Gain [dB]
i Trigger Monitor
Wet/Dry
j Src
Amt
a: Envelope Select
Side PEQ
Envelope - Control
Envelope - Control
Envelope Select
L/R Mix, L Only, R Only, L/R
Individually
1.0:1...50.0:1, Inf:1
–40...0dB
1...100
1...100
–16...+24dB
Off, On
20...12.00kHz
0.5...10.0
–18.0...+18.0dB
Off, On
Dry, 1:99...99:1, Wet
None...Tempo
–100...+100
When L/R Mix is selected for this parameter, the left and right channels are
linked to control the Limiter using the mixed signal. If L Only (or R Only) is
selected, the left and right channels are linked, and the Limiter is controlled via
only the left (or right) channel.
With L/R individually, the left and right channels control the Limiter individu-
ally.
Gain Adjust
Limiter
Trigger Monitor
Limiter
Gain Adjust
Selects from linking both channels, controlling only from
left channel, only from the right channel, or controlling
each channel individually. P.49
Sets the signal compression ratio.
Sets the level above which the compressor is applied.
P.15
Sets the attack time. P.16
Sets the release time. P.16
Sets the output gain. P.15
Toggles between trigger signal's EQ on/off
Trigger signal's EQ center frequency
Trigger signal's EQ bandwidth
Trigger signal's EQ gain
Switches between effect output monitor and trigger signal
monitor. P.16
Sets the balance between the effect and dry sounds.
Modulation source of effect balance
Modulation amount of effect balance
02: Stereo Limiter
Wet / Dry
Wet / Dry
P.15
P.16
P.16
49