This effect simulates a "Doppler effect" (sound moving while changing its pitch) that sounds, for exam-
ple, like an ambulance siren passing by. Mixing the effect sound with the dry sound will create a special
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
LFO Frequency [Hz]
a: LFO Mode
LFO Mode = 1-Shot
Dry, 1:99...99:1, Wet
The LFO Mode parameter switches LFO operation mode. When Loop is
selected, the Doppler effect will be created repeatedly.
When LFO Mode is set to 1-Shot, the Doppler effect is created only once when
the modulation source speciﬁed in the Src ﬁeld is turned on. At this time if you
do not set the Src parameter, the Doppler effect will not be created, and no effect
sound will be output.
The effect is off when a value for the modulation source speciﬁed for the
Src parameter is smaller than 64, and the effect is on when the value is 64
or higher. The Doppler effect is triggered when the value changes from 63
or smaller to 64 or higher.
Switches LFO operation mode.
When LFO Mode is set to 1-Shot, this modulation source
triggers the LFO.
Modulation source of LFO speed
Modulation amount of LFO speed
Pitch variation of the moving sound
Modulation source of pitch variation
Modulation amount of pitch variation
Panning of the moving sound
Modulation source of panning
Modulation amount of panning
Sets the balance between the effect and dry sounds.
Modulation source of effect balance
Modulation amount of effect balance
Wet / Dry
Wet / Dry