Korg TouchView Trinity Effect Manual page 83

The following is an example of fade-in where the LFO speed is increased from
"1.0Hz" to "4.0Hz" when a note-on message is received.
a: AUTOFADE Src = Gate1
e: LFO Frequency [Hz] = 1.0
e: Src = AUTOFADE
e: Amt = 3.0
The effect is off when a value for the dynamic modulation source speci-
fied for the AUTOFADE Src parameter is smaller than 64, and the effect is
on when the value is 64 or higher. The AutoFade function is triggered
when the value changes from 63 or smaller to 64 or higher.
Gate1 Signal
Note On
AUTOFADE
Fade-In Dealy
AUTOFADE
All Note Off
Fade-In Rate
24: Stereo Vibrato
AutoFade
AUTOFADE Src=Gate1
LFO Frequency[Hz]=1.0
Src=AUTOFADE
Amt=+3.0
LFO Frequency
=1.0+3.0=4.0Hz
LFO Frequency
=1.0Hz
79