Download Print this page

Korg TouchView Trinity Effect Manual: Envelope Phaser

Korg music workstation drs effect guide.
Hide thumbs

Advertisement

20: Envelope Phaser

This Phaser uses an envelope generator for modulation. You will obtain the same pattern of phasing each
time you play. You can also control the Phaser directly using the modulation source.
Mono In - Mono Out
In
D
-mod
Manu Bottom
a
(Manual Bottom)
Manu Top
b
(Manual Top)
Sweep Mode
c
Src
d
EG Decay
e
Resonance
f
High Damp [%]
Wet/Dry
g
Src
Amt
Phaser
Resonance
D-mod
Sweep Mode
EG Decay
EG
0...100
0...100
EG, D-mod
None...Tempo
1...100
–100...+100
0...100%
–Wet, –99...–1, Dry,
1...99, Wet
None...Tempo
–100...+100
High Damp
Sets the lower limit of the frequency range to which the
effect is applied.
P.24
Sets the higher limit of the frequency range to which the
effect is applied.
P.24
Determines whether the phaser is controlled by the enve-
lope generator or by the modulation source.
Modulation source that triggers the EG (when EG is
selected for Sweep Mode), or modulation source that
causes the phaser to sweep (when D-mod is selected for
Sweep Mode).
Sets the EG decay speed.
P.34
Sets the resonance amount.
Sets the resonance damping amount in the high range.
P.35
Sets the balance between the effect and dry sounds.
P.25, 35
Modulation source of effect balance
Modulation amount of effect balance
20: Envelope Phaser
Wet / Dry
P.34
P.35
37

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: