27: Stereo Tremolo - Korg TouchView Trinity Effect Manual

27: Stereo Tremolo

27: Stereo Tremolo
This is a stereo tremolo. You can create sound panning to left and right by offsetting the phase of the left
and right LFOs from each other. The tremolo effect can fade-in by means of the AutoFade function.
Stereo In - Stereo Out
Left
Right
LFO: Tri/Sin/Sqr/Up/Down
AutoFade
AUTOFADE Src
a
Fade-In Rate
LFO Waveform
b
LFO Shape
c LFO Phase [degree]
LFO Frequency [Hz]
d Src
Amt
Depth
e Src
Amt
Wet/Dry
f Src
Amt
c: LFO Phase [degree]
84
LFO Shape
None...Tempo
1...100
Triangle, Sine, Square, Up,
Down
–100...+100
–180...+180
0.02...20.00Hz
None...AUTOFADE
–20.00...+20.00Hz
0...100
None...AUTOFADE
–100...+100
Dry, 1:99...99:1, Wet
None...AUTOFADE
–100...+100
This parameter determines the difference between the left and right LFO phases.
A higher value will simulate the auto-pan effect in which the sound is panned
between left and right.
Tremolo
Tremolo
LFO Phase
LFO Frequency
Depth
Wet/Dry
Selects the modulation source that triggers AutoFade.
P.59
Sets the rate of fade-in.
Selects LFO Waveform.
Determines how much the LFO waveform is changed.
P.32
LFO phase difference between the left and right
LFO speed
Modulation source of LFO speed. AutoFade is available.
Modulation amount of LFO speed
Depth of LFO modulation
Modulation source of the depth of modulation. AutoFade
is available.
Modulation amount of the depth of modulation
Sets the balance between the effect and dry sounds.
Modulation source of effect balance. AutoFade is avail-
able.
Modulation amount of effect balance
Wet / Dry
Wet / Dry
P.42
P.84