17: Stereo Flanger - Korg TouchView Trinity Effect Manual

17: Stereo Flanger

This is a stereo flanger. You can add spread to the sound by offsetting the phase of the left and right LFOs
from each other. The flanging effect can fade-in by means of the AutoFade function.
Stereo In - Stereo Out
Left
FB Mode
(Normal/Cross)
Right
LFO: Tri / Sine
AutoFade
AUTOFADE Src
a
Fade-In Rate
b Delay Time [msec]
LFO Waveform
c
LFO Shape
d LFO Phase [degree]
LFO Frequency [Hz]
e Src
Amt
f Depth
Feedback
g
FB Mode
h High Damp [%]
i Spread
Wet/Dry
j
Src
Amt
g: FB Mode
Flanger
Feedback
Flanger
LFO Phase
LFO Shape
None...Tempo
1...100
0.0...50.0msec
Triangle, Sine
–100...+100
–180...+180
0.02...20.00Hz
None...AUTOFADE
–20.00...+20.00Hz
0...100
–100...+100
Normal, Cross
0...100%
–100...+100
–Wet...–1:99, Dry,
1:99...Wet
None...AUTOFADE
–100...+100
This parameter sets the feedback routing. "Cross" will select a crossover flanger
in which each channel applies feedback to the other channel.
Spread
High Damp
FB Mode
(Normal/Cross)
LFO Frequency
Wet / Dry
Selects the modulation source that triggers AutoFade.
P.59
Sets the rate of fade-in.
Delay from the original sound
Selects LFO Waveform.
Determines how much the LFO waveform is changed.
P.32
LFO phase difference between the left and right
LFO speed
Modulation source of LFO speed. AutoFade is available
Modulation amount of LFO speed
Depth of LFO modulation
Feedback amount P.32
Sets the feedback routing.
Feedback damping amount in the high range
Sets the width of stereo image of effect sound.
Sets the balance between the effect and dry sounds.
P.25, 32
Modulation source of effect balance. AutoFade is avail-
able
Modulation amount of effect balance
17: Stereo Flanger
Wet / Dry
Wet / Dry
P.65
P.69
P.32
P.65
69