09: St. Tempo Phaser (Stereo Tempo Phaser)
09: St. Tempo Phaser
This is a stereo tempo phaser. You can select random or step waveforms for the LFO, and synchronize the
speed of the random/step waveform with tempo. Also, synchronizing the LFO to note-on messages will
produce a phasing effect with a ﬁxed timing.
Stereo In - Stereo Out
LFO Lch Phase [deg]
Rch Phase [deg]
High Damp [%]
(Stereo Tempo Phaser)
Step Length: 1/16
Triangle, Sine, Step-Tri,
1...16 / 1...16
1...16 / 1...32
LFO: Tri / Sine
LFO: Step-Tri / Step Sin / Random
LFO reset on/off
Modulation source that resets LFO
Selects LFO waveform.
Determines how much the LFO waveform is changed.
Left LFO phase after reset
Right LFO phase after reset
Switches between the speciﬁed tempo and clock sync.
Source when LFO Mode = D-mod (ﬁxed to Tempo)
Tempo when LFO Mode = Manual
Sets the LFO cycle. LFO Cycle = Length x Whole Note.
Sets the LFO step cycle. LFO step Cycle = Length x
Sets the center frequency to which the effect is applied.
Depth of LFO modulation
Modulation source of LFO modulation depth
Modulation amount of LFO modulation depth
Sets resonance amount.
Resonance damping amount in the high range
Sets the width of the stereo image of the effect sound.
Sets the balance between the effect and dry sounds.
Modulation source of effect balance
Modulation amount of effect balance
Wet / Dry
Wet / Dry