Download Print this page

Korg TouchView Trinity Effect Manual: Delay

Korg music workstation drs effect guide.
Hide thumbs

Advertisement

26: Delay

26: Delay
This delay effect delays the input signal over time. You can change the character of the delay sound by
setting the feedback damping amount separately for the low range and high range.
Mono In - Mono Out
In
Input Level D-mod
a
Delay Time [msec]
Feedback
b
Src
Amt
c
High Damp [%]
d
Low Damp [%]
Input Level D-mod: Src
e
Amt
Wet/Dry
f
Src
Amt
c: High Damp [%]
d: Low Damp [%]
e: Input Level D-mod: Src:
e: Amt
Input Level
x1.0
x0.5
Zero
44
Delay
0.0...680.0msec
–100...+100
None...Tempo
–100...+100
0...100%
0...100%
None...Tempo
–100...+100
Dry, 1:99...99:1, Wet
None...Tempo
–100...+100
These parameters set the damping amount for the high range and low range
respectively. Each time feedback is input, the tone of the delay sound becomes
darker, or lighter.
These parameters set dynamic modulation of the input level.
Amt= +100
Amt= +50
D
-mod
Higher
Max
High Damp Low Damp
Feedback
Sets the delay time.
Sets the feedback amount.
Modulation source of the feedback amount
Modulation amount of the feedback amount
Damping amount in the high range
Damping amount in the low range
Modulation source of the input level
Modulation amount of the input level
Sets the balance between the effect and dry sounds.
Modulation source of effect balance
Modulation amount of effect balance
Input Level
x1.0
x0.5
Zero
Wet / Dry
P.44
P.44
P.44
Input Level D-mod
Amt= –50
Amt= –100
D
-mod
Higher
Max

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: