h: Panning Preset
Dry, 1:99...99:1, Wet
These parameters set the output status of each Tap.
Always On: Output is always on. (No modulation)
Always Off: Output is always off. (No modulation)
On Off (dm): Output level is switched from on to off depending on the modu-
Off On (dm): Output level is switched from off to on depending on the modu-
Combining these parameters, you can change from 4-phase chorus to two-tap
delay by crossfading them gradually via the modulation source during a perfor-
This parameter selects combinations of stereo images of the tap outputs.
Tap output level, feedback amount and effect balance are controlled simulta-
neously via a modulation source.
06: Multitap Chorus/Dly (Multitap Chorus/Delay)
Tap1 feedback amount
Modulation source for the Tap output level, feedback
amount, and effect balance
Modulation amount of Tap1 feedback amount
Balance between effect sound and dry sound
Modulation amount of effect balance