This effect causes the pitch of the input signal to shimmer. Using the AutoFade allows you to increase or
decrease the shimmering speed.
Mono In - Mono Out
LFO: Tri / Sine
LFO Frequency [Hz]
Dry, 1:99...99:1, Wet
Sets the modulation source that starts AutoFade.
Sets the rate of fade-in.
Selects the LFO Waveform.
Determines how much the LFO waveform shape is
Modulation source of LFO speed. AutoFade is available.
Modulation amount of LFO speed
Depth of LFO modulation
Modulation source of the LFO modulation depth
Modulation depth of the LFO modulation depth
Sets the balance between the effect and dry sounds.
Modulation source of effect balance
Modulation amount of effect balance
Wet / Dry