39: St. Multitap Delay (Stereo Multitap Delay) - Korg TouchView Trinity Effect Manual

39: St. Multitap Delay (Stereo Multitap Delay)

39: St. Multitap Delay
The left and right Multitap Delays have two taps respectively. Changing the routing of feedback and tap
output allows you to create various patterns of complex effect sounds.
Stereo In - Stereo Out
Left
Input Level D-mod
Input Level D-mod
Right
Mode: Normal
a Mode
b Tap1 Time [msec]
c Tap2 Time [msec]
d Tap1 Level
Feedback
e Src
Amt
f High Damp [%]
g Low Damp [%]
Input Level D-mod: Src
h
Amt
Spread
i Src
Amt
Wet/Dry
j Src
Amt
a: Mode
104
(Stereo Multitap Delay)
Feedback
High Damp Low Damp
Mode
High Damp Low Damp
Feedback
Mode: Cross Feedback
Normal, Cross Feedback,
Cross Pan1, Cross Pan2
0.0...680.0msec
0.0...680.0msec
0...100
–100...+100
None...Tempo
–100...+100
0...100%
0...100%
None...Tempo
–100...+100
–100...+100
None...Tempo
–100...+100
Dry, 1:99...99:1, Wet
None...Tempo
–100...+100
You can change how the left and right delay signals are panned by modifying
the routing of the left and right delay as shown in the figure above. You need to
input different sounds to each channel in order for this parameter to be effective.
Delay
(2)
(1) (1)
Tap1 Level Mode
(1)
(2)
Delay
Mode: Cross Pan1
Switches the left and right delay routing.
Sets the Tap1 delay time.
Sets the Tap2 delay time.
Tap1 output level
Sets the Tap2 feedback amount.
Modulation source of the Tap2 feedback amount
Modulation amount of the Tap2 feedback amount
Damping amount in the high range
Damping amount in the low range
Modulation source of the input level
Modulation amount of the input level
Sets the width of the stereo image of the effect sound.
P.65
Modulation source of the effect sound's stereo image
width
Modulation amount of the effect sound's stereo image
width
Sets the balance between the effect and dry sounds.
Modulation source of effect balance
Modulation amount of effect balance
Wet / Dry
Tap1=(1)
Spread
Tap2=(2)
Wet / Dry
Mode: Cross Pan2
P.104
P.45
P.44
P.44
P.44