Korg TouchView Trinity Effect Manual page 138

12: Rotary Speaker OD (Rotary Speaker Overdrive)
Horn Acceleration
h
Horn Ratio
Mic Distance
i
Mic Spread
Wet/Dry
j Src
Amt
a: Sw
134
0...100
Stop, 0.50...2.00
0...50
0...50
Dry, 1:99...99:1, Wet
None...Tempo
–100...+100
This parameter determines how to switch on/off the overdrive via a modula-
tion source.
When Sw = Momentary, overdrive is applied only when a pedal or joystick is
held in position.
Only when the value for the modulation source is 64 or higher, the over-
drive effect is applied.
When Sw = Toggle, overdrive is turned on/off each time the pedal or joystick is
operated.
Each time when the value for the modulation source exceeds 64, the over-
drive effect is switched on/off.
How quickly the horn rotation speed in the high range is
switched. P.43
Adjusts the (high-range side) horn rotation speed. Stan-
dard value is 1.0. Selecting "Stop" will stop the rotation.
Distance between the microphone and rotary speaker.
P.101
Angle of left and right microphones
Sets the balance between the effect and dry sounds.
Modulation source of effect balance
Modulation amount of effect balance