09: Dyna Exciter - Korg TouchView Trinity Effect Manual

09: Dyna Exciter

09: Dyna Exciter
This effect gives a frame to a sound and emphasizes the outline. You can control the intensity of the effect
using dynamic modulation.
Mono In - Mono Out
In
D -mod
Blend
a Src
Amt
Emphatic Point
b Src
Amt
c EQ Trim
d Pre LEQ Gain [dB]
e Pre HEQ Gain [dB]
Wet/Dry
f Src
Amt
a: Blend
b: Emphatic Point
26
LEQ HEQ
EQ Trim
–100...+100
None...Tempo
–100...+100
0...140
None...Tempo
–100...+100
0...100
–15.0...+15.0dB
–15.0...+15.0dB
Dry, 1:99...99:1, Wet
None...Tempo
–100...+100
This parameter sets the depth (intensity) of the Exciter effect. Positive values
give a frequency pattern (to be emphasized) different from negative values.
This parameter sets the frequency to be emphasized. Higher values will empha-
size lower frequencies.
Exciter
Sets the intensity (depth) of the Exciter effect.
Modulation source of the Exciter intensity
Modulation amount of the Exciter intensity
Sets the frequency to be emphasized.
Modulation source of the frequency to be emphasized
Modulation amount of the frequency to be emphasized
2-band EQ input level
Low EQ gain
High EQ gain
Sets the balance between the effect and dry sounds.
Modulation source of effect balance
Modulation amount of effect balance
Wet / Dry
P.26
P.26