27: Multitap Delay - Korg TouchView Trinity Effect Manual

27: Multitap Delay

This Multitap Delay has two taps for delay. With various delay time settings, you can create complex
delay sounds.
Mono In - Mono Out
In
Input Level D-mod
a Tap1 Time [msec]
b Tap2 Time [msec]
c Tap1 Level
Feedback
d Src
Amt
e High Damp [%]
f Low Damp [%]
Input Level D-mod: Src
g
Amt
Wet/Dry
h Src
Amt
c: Tap1 Level
Feedback
High Damp Low Damp
0.0...680.0msec
0.0...680.0msec
+0...+100
–100...+100
None...Tempo
–100...+100
0...100%
0...100%
None...Tempo
–100...+100
Dry, 1:99...99:1, Wet
None...Tempo
–100...+100
This parameter sets the output level of Tap1. Creating a difference in the volume
level from Tap2 will add a groove feeling to a somewhat monotonous delay and
feedback.
Delay
(2)
(1) (1)
Tap1 Level
Sets the Tap1 delay time.
Sets the Tap2 delay time.
Tap1 output level P.45
Sets the Tap2 feedback amount.
Modulation source of the Tap2 feedback amount
Modulation amount of the Tap2 feedback amount
Damping amount in the high range
Damping amount in the low range
Modulation source of the input level
Modulation amount of the input level
Sets the balance between the effect and dry sounds.
Modulation source of effect balance
Modulation amount of effect balance
27: Multitap Delay
Wet / Dry
Tap1=(1)
Tap2=(2)
P.44
P.44
P.44
45