06: Multitap Chorus/Dly (Multitap Chorus/Delay) - Korg TouchView Trinity Effect Manual

06: Multitap Chorus/Dly (Multitap Chorus/Delay)

06: Multitap Chorus/Dly
This effect has six chorus blocks with different LFO phases. You can produce a complex stereo image by
setting a different delay time and depth for each block. You can control the delay output level via a mod-
ulation source.
Wet: Mono In - Stereo Out / Dry: Stereo In -Stereo Out
Left
+
Right
LFO: Triangle
D -mod
a LFO Frequency [Hz]
Tap1(000) [msec]
Depth
b
Status
Tap2(180) [msec]
Depth
c
Status
Tap3(060) [msec]
Depth
d
Status
Tap4(240) [msec]
Depth
e
Status
Tap5(120) [msec]
Depth
f
Status
Tap6(300) [msec]
Depth
g
Status
h Panning Preset
126
(Multitap Chorus/Delay)
Feedback
Tap1 Delay
Tap2 Delay
Tap3 Delay
Tap4 Delay
Tap5 Delay
Tap6 Delay
0 [degree]
180 [degree]
60 [degree]
240 [degree]
120 [degree]
300 [degree]
On/Off Control
0.02...13.00Hz
0...570msec
0...30
Always On, Always Off,
On Off(dm), Off On(dm)
0...570msec
0...30
Always On, Always Off,
On Off(dm), Off On(dm)
0...570msec
0...30
Always On, Always Off,
On Off(dm), Off On(dm)
0...570msec
0...30
Always On, Always Off,
On Off(dm), Off On(dm)
0...570msec
0...30
Always On, Always Off,
On Off(dm), Off On(dm)
0...570msec
0...30
Always On, Always Off,
On Off(dm), Off On(dm)
1, 2, 3, 4
Panning Preset
LFO speed
Tap1 (LFO phase = 0) delay time
Depth of Tap1 chorus
Selects on, off, or modulation source for the control of
Tap1 output. P.127
Tap2 (LFO phase = 180) delay time
Depth of Tap2 chorus
Selects on, off, or modulation source for the control of
Tap2 output. P.127
Tap3 (LFO phase = 60) delay time
Depth of Tap3 chorus
Selects on, off, or modulation source for the control of
Tap3 output. P.127
Tap4 (LFO phase = 240) delay time
Depth of Tap4 chorus
Selects on, off, or modulation source for the control of
Tap4 output. P.127
Tap5 (LFO phase = 120) delay time
Depth of Tap5 chorus
Selects on, off, or modulation source for the control of
Tap5 output. P.127
Tap6 (LFO phase = 300) delay time
Depth of Tap6 chorus
Selects on, off, or modulation source for the control of
Tap6 output. P.127
Specifies the stereo image of each Tap.
Wet / Dry
Wet / Dry
P.127