42: St. Modulation Delay - Korg TouchView Trinity Effect Manual

42: St. Modulation Delay

42: St. Modulation Delay
This stereo delay uses an LFO to sweep the delay time. The pitch also varies. You will obtain a delay
sound with swell and shimmering. You can also control the delay time using a modulation source.
Stereo In - Stereo Out
Left
Right
D -mod
LFO Sync
a Modulation Mode
D-mod Modulation
b Src
Response
LFO Waveform
c
LFO Shape
d LFO Frequency [Hz]
LFO Sync
e
Src
L LFO Phase [degree]
f
R LFO Phase [degree]
L Depth
g
R Depth
L Delay Time [msec]
h
R Delay Time [msec]
L Feedback
i
R Feedback
Wet/Dry
j
Src
Amt
108
Delay
Delay
Response
LFO Shape
LFO: Tri / Sine
LFO, D-mod
L/R:+/+, L/R:+/–
None...Tempo
0...30
Triangle, Sine
–100...+100
0.02...20.00Hz
Off, On
None...Tempo
–180...+180
–180...+180
0...200
0...200
0.0...500.0
0.0...500.0
–100...+100
–100...+100
–Wet...–1:99, Dry,
1:99...Wet
None...Tempo
–100...+100
Feedback
D-mod
L/R: +/+ +/–
LFO
Modulation Mode
LFO Phase
Switches between LFO modulation control and modula-
tion source control.
Reversed L/R control by modulation source
Modulation source that controls delay time
Rate of response to the modulation source
Selects LFO waveform.
Determines how much the LFO waveform is modified.
P.32
LFO speed
LFO reset off/on
Modulation source that resets the LFO
Phase obtained when the left LFO is reset
Phase obtained when the right LFO is reset
Depth of the left LFO modulation
Depth of the right LFO modulation
Left delay time
Right delay time
Feedback amount of left delay
Feedback amount of right delay
Sets the balance between the effect and dry sounds.
P.25
Modulation source of effect balance
Modulation amount of effect balance
Wet / Dry
Wet / Dry
P.109
P.109
P.109