Messages Regarding Printheads; Cannot Adjust Printhead; Wrong Printhead; Printhead Error - Canon imagePROGRAF iPF771 User Manual

iPF770

Messages regarding printheads

Messages regarding printheads

Cannot adjust printhead. ................................................................................................................................ 567

Wrong printhead. ............................................................................................................................................ 567

Printhead error ............................................................................................................................................... 567

Cannot recognize print head. .......................................................................................................................... 567

Execute printhead cleaning. ............................................................................................................................ 568

Cannot adjust printhead.

Cannot adjust printhead.
Cause
The Printhead nozzles are
clogged.
The Printhead cannot be
aligned; highly transparent film
is loaded.
The Printhead is installed
crooked.
Wrong printhead.
Wrong printhead.
Cause
An incompatible Printhead has been installed.

Printhead error

Printhead error
Cause
There is a problem with the Printhead.

Cannot recognize print head.

Cannot recognize print head.
No Printhead is installed.
The Printhead cannot be recognized because it is not installed correctly.
User's Guide
Execute Head Posi. Adj. again, as follows.
1.
Press the OK button to clear the error.
2.
Print a test pattern to check the nozzles.
(See "Checking for Nozzle Clogging.")
3.
Clean the Printhead if the nozzles are clogged.
(See "Cleaning the Printhead.")
4.
Execute Head Posi. Adj. again.
(See "Automatic Adjustment to Straighten Lines and Colors.")
Press the OK button to clear the error.
We recommend using a type of paper that you often use, other than film, for Printhead adjustment.
(See "Automatic Adjustment to Straighten Lines and Colors.")
Straighten the Printhead as follows, and then execute Head Posi. Adj. again.
1.
Press the OK button to clear the error.
2.
Use Head Inc. Adj. to adjust the angle of inclination of the Printhead.
(See "Adjusting Line Misalignment.")
3.
Execute Head Posi. Adj. again.
(See "Automatic Adjustment to Straighten Lines and Colors.")
Open the Top Cover and replace the Printhead with a new one.
(See "Replacing the Printhead.")
Open the Top Cover and replace the Printhead with a new one.
(See "Replacing the Printhead.")
Cause
Corrective Action
P.502
➔
P.503
➔
P.483
➔
Corrective Action
P.504
➔
Corrective Action
P.504
➔
Corrective Action
Follow these steps to install the Printhead.
1.
Open the Top Cover.
2.
Install the Printhead.
(See "Replacing the Printhead.")
Follow these steps to reinstall the Printhead.
1.
Open the Top Cover.
2.
Reinstall the Printhead.
(See "Replacing the Printhead.")
Cannot adjust printhead.
P.480
➔
P.480
➔
P.480
➔
P.504
➔
P.504
➔
567