Messages Regarding Printheads - Canon iPF6300 User Manual

Messages regarding printheads

Cannot adjust printhead. ........................................................................................................................... 927
PHeads: wrong pos. ................................................................................................................................. 927
Wrong x printhead. (x is L, R, or not displayed) ........................................................................................ 927
x printhead error (x is L, R, or not displayed) ............................................................................................ 927
No x printhead (x is L, R, or not displayed) ............................................................................................... 928
Execute printhead cleaning. ...................................................................................................................... 928
Cannot adjust printhead.
Cause
The Printhead noz-
zles are clogged.
The Printhead cannot
be aligned; highly
transparent film is
loaded.
PHeads: wrong pos.
Cause
The printheads are installed in
the wrong positions.
Wrong x printhead. (x is L, R, or not displayed)
Cause
An incompatible
Printhead has been
installed.
x printhead error (x is L, R, or not displayed)
Cause
There is a prob- Follow these steps to replace the Printhead.
lem with the
1.
Printhead.
iPF6300
Execute Head Posi. Adj. again, as follows.
1.
Press the OK button to clear the error.
2.
Print a test pattern to check the nozzles.
(See "Checking for Nozzle Clogging.")
3.
Clean the Printhead if the nozzles are clogged.
(See "Cleaning the Printhead.")
4.
Execute Head Posi. Adj. again.
(See "Automatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.).")
→P.712
Press the OK button to clear the error.
We recommend using a type of paper that you often use, other than film, for Printhead ad-
justment.
(See "Automatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.).")
→P.712
Open the Top Cover and switch the Printhead used once in the right side to the
right side. Switch the Printhead used once in the left side to the left side.
Open the Top Cover. Replace the Printhead L with a new one if Printhead L is displayed
and the Printhead R if Printhead R is displayed. If neither left or right is indicated, replace
both Printhead L and Printhead R with new ones.
(See "Replacing the Printhead.")
Open the Top Cover.
Error Message > Messages regarding printheads
Corrective Action
→P.847
→P.848
Corrective Action
Corrective Action
→P.849
Corrective Action
>
Cannot adjust printhead.
12
927