Primary I/O Drawer Operator Panel Behavior During Power-On
After Connecting ac Power (dc Power in a dc-powered System)
Drawer State
Standby
System power ON
Receive firmware command
Thereafter
After Power is Removed Because of a Shutdown
Drawer State
Standby
System power ON
Receive firmware command
Thereafter
Critical error codes are posted on the top line (left-justified) of the drawer display with the attention light on
solid. Any location codes are posted on the bottom line (left-justified).
Noncritical error codes are not posted. The drawer display remains blank with the attention light on solid.
Power LED
Blinking slow
Blinking fast
On solid
On solid
On solid
Power LED
Blinking slowly
Blinking quickly
On solid
On solid
On solid
Drawer Operator Panel Display
8xxx checkpoints followed by OK
OK
9xxx checkpoints ending with E1FF
Exxx checkpoints ending with E105
0xxx checkpoints ending with a blank
display
Drawer Operator Panel Display
OK is displayed
OK
9xxx checkpoints ending with E1FF
Exxx checkpoints ending with E105
0xxx checkpoints ending with a blank
display
Chapter 1. Reference Information
27