2U compute server
The 2U compute server consists of two identical dx360 system-board trays installed
in a 2U flex chassis. Each system-board tray has one PCIe adapter connector and
one 3.5–inch hard disk drive bay.
2U storage server
The 2U storage server consists of one dx360 system-board tray with the storage
enclosure installed in a 2U flex chassis. The storage enclosure provides four
additional 3.5–inch hard disk drive bays for the system-board tray, for a total of five.
Depending on the server configuration, you can configure the 2U storage server
with up to four 3.5–inch simple-swap SAS hard disk drives or up to five 3.5–inch
simple-swap SATA hard disk drives.
Operator panel controls, LEDs, connectors, and power
The following illustration shows the controls, LEDs, and connectors on the front of
the dx360 system-board tray. The operator panel on the system-board tray is the
same for all dx360 server configurations.
Power-control button: Press this button to turn the system-board tray on and off
manually.
Chapter 2. Components, features, and controls
13