Call-Out Policy Setup Menu - IBM RS/6000 Enterprise Server M80 Service Manual

Call-Out Policy Setup Menu

Callout settings can be set using the following menu:
CALL-OUT POLICY SETUP MENU
1. Call-Out policy (First/All):
Currently First
2. Remote timeout, (in seconds):
Currently 120
3. Remote latency, (in seconds):
Currently 2
4. Number of retries:
Currently 2
98. Return to Previous Menu
1>
v Call-Out policy can be set to first or all. If call-out policy is set to first, the service processor stops
at the first successful call-out to one of the following numbers in the order listed:
1. Service center
2. Customer administrative center
3. Pager
If call-out policy is set to all, the service processor attempts a call-out to all of the following numbers in
the order listed:
1. Service center
2. Customer administrative center
3. Pager
v Remote timeout and remote latency are functions of your service provider's catcher computer. Either
use the defaults or contact your service provider for recommended settings.
v Number of retries is the number of times you want the server to retry calls that fail to complete.
384
Service Guide