Serial Port Selection Menu; Serial Port Speed Setup Menu - IBM RS/6000 Enterprise Server M80 Service Manual
Hide thumbs
Also See for RS/6000 Enterprise Server M80:
- User manual (296 pages) ,
- Installation manual (94 pages) ,
- User manual (212 pages)
Table of Contents
Advertisement
Serial Port Selection Menu
This menu allows you to enable or disable the call-in and call-out functions of each serial port in any
combination.
Serial Port Selection Menu
1. Serial Port 1 Call-Out:
Currently Disabled
2. Serial Port 2 Call-Out:
Currently Disabled
98. Return to Previous Menu
Call-in and ring-indicate power-on cannot be enabled at the same time. If ring-indicate power-on is already
enabled and you try to enable call-in, a message prompts you for confirmation. Refer to the message
displayed on the screen.
Serial Port Speed Setup Menu
This menu allows you to set serial port speed to enhance terminal performance or to accommodate
modem capabilities.
Serial Port Speed Setup Menu
1. Serial Port 1 Speed:
Currently 9600
2. Serial Port 2 Speed:
Currently 9600
98. Return to Previous Menu
1>
A serial port speed of 9600 baud or higher is recommended. Valid serial port speeds are as follows:
50
75
110
134
150
300
382
Service Guide
3. Serial Port 1 Call-In:
Currently Disabled
4. Serial Port 2 Call-In:
Currently Disabled
600
1200
1800
2000
2400
3600
4800
7200
9600
19200
38000
57600
115200
Advertisement
Table of Contents
