IBM RS/6000 Enterprise Server M80 Service Manual page 357
Hide thumbs
Also See for RS/6000 Enterprise Server M80:
- User manual (296 pages) ,
- Installation manual (94 pages) ,
- User manual (190 pages)
Table of Contents
Advertisement
Table 9. Common Firmware Error Codes (continued)
Error Code Description
B10F 1008 Service processor failure
B10F 100E Service processor boot flash corrupted
B10F 100F Service processor base flash corrupted
B10F 1300 Service processor failure
B10F 1370 Service processor flash update failure
B10F 1380 Service processor program failure
B10F 1381 Service processor flash error
B10F 1384 Service processor failure
B10F 1387 Service processor failure
B10F 1400 Service processor failure
B10F 1401 Service processor failure
B10F 1670 Service processor flash update failure
B10F 1672 Service processor firmware update invalid
B10F 1675 Service processor memory failure
B10F 1681 Service processor firmware update invalid
B10F 1682 Service processor firmware update invalid
B10F 1683 Service processor firmware update invalid
B1FD 0013 A firmware update has failed because the
update image is invalid. The update was
aborted before any changes were made to
the currently installed firmware.
B1FD 0015 Too many firmware update diskettes inserted
(or wrong faulty update image).
Action/
Possible Failing FRU
Primary I/O drawer backplane
Location: U0.1-P1
Primary I/O drawer backplane
Location: U0.1-P1
Primary I/O drawer backplane
Location: U0.1-P1
Primary I/O drawer backplane
Location: U0.1-P1
1. Retry flash update
2. Primary I/O drawer backplane
Location: U0.1-P1
1. Update system firmware
2. Primary I/O drawer backplane
Location: U0.1-P1
1. Update system firmware
2. Primary I/O drawer backplane
Location: U0.1-P1
Primary I/O drawer backplane
Location: U0.1-P1
Primary I/O drawer backplane
Location: U0.1-P1
Primary I/O drawer backplane
Location: U0.1-P1
Primary I/O drawer backplane
Location: U0.1-P1
1. Retry flash update
2. Primary I/O drawer backplane
Location: U0.1-P1
Call second level of support
Primary I/O drawer backplane
Location: U0.1-P1
Call second level of support
Call second level of support
Call second level of support
Reset the service processor (by activating the
pinhole reset switch or by disconnecting, then
reconnecting power).
Then install a valid firmware update image for
the specific system type and model.
1. Assure the firmware update image is
correct for the specific system type and
model.
2. Replace the update diskettes with a new
set of firmware diskettes.
Chapter 5. Error Code to FRU Index
339
Advertisement
Table of Contents
