Scan Log Dump Progress Codes - IBM RS/6000 Enterprise Server M80 Service Manual

Table 9. Common Firmware Error Codes (continued)
Error Code Description
B1xx 8FF0 Informational message

Scan Log Dump Progress Codes

Table 10. Scan Log Dump Progress Codes
Error Code Description
D130 xxxx Scan log dump in progress
346
Service Guide
Action/
Possible Failing FRU
No action required. (The data in these
informational log entries may be used by
support personnel to gather additional debug
information.)
The value of word 13 may indicate which
type of informational message is being
generated.
SPCN Informational Codes:
The following values of word 13 indicate an
SPCN informational message: C006, C007,
C00C, C030, C0E0, C0E2, C0F0, and C0F1.
No action is required by the customer or
service representative.
Note: To find the value of word 13:
v If the system is down, go to the service
processor error log and find the error log
entry containing B1xx 8FF0. Examine the
first two bytes of word 13 of the detailed
entry.
v If the system is running, do the following:
– Examine the AIX error log entry
containing B1xx 8FF0. This is a
FIRMWARE_EVENT error with an
identifier of A6D1BD62.
– In the detail data, find the string B1xx
8FF0. (If present, it will be at byte 60 of
the detail data.)
– Move forward 8 bytes to bytes 68 and
69; this is the value of word 13 in the
service processor error log.
Action/
Possible Failing FRU
Informational message only. As
the dump progresses, the xxxx
characters in the display will
change. When the scan log
dump is complete, the system
may reboot, depending on the
reboot policy settings.