IBM RS/6000 Enterprise Server M80 Service Manual page 140

Step 1540-18
Are there any adapters in slots 5, 6, 7, 8, or 9?
NO Go to "Step 1540-19."
YES Go to "Step 1540-21" on page 123.
Step 1540-19
Are there any adapters in slots 10, 11, 12, 13 or 14?
NO Go to "Step 1540-25" on page 126.
YES Go to "Step 1540-22" on page 123.
Step 1540-20
1. If it is not already off, turn off the power.
2. Remove all adapters from slots 1, 2, 3, and 4 that are not attached to the boot device.
3. Label and record the location of any cables attached to the adapters.
4. Record the slot number of the adapters.
5. Turn on the power to boot standalone diagnostics from CD.
6. If the TTY screen displays Enter 0 to select this console, press the 0 key on the TTY terminal's
keyboard.
7. If the Please define the System Console screen is displayed, follow directions to select the system
console.
8. Use the Display Configuration and Resource List to list all attached devices and adapters (refer to the
RS/6000 and Eserver pSeries Diagnostic Information for Multiple Bus Systems if necessary).
9. Check that all attached devices and adapters are listed.
Did the Please define the System Console screen display and are all attached devices and adapters
listed?
NO Go to "Step 1540-18."
YES Go to "Step 1540-23" on page 124.
122
Service Guide