Scan Log Dump Progress Codes - IBM F80 Service Manual

Table 9. Common Firmware Error Codes (continued)
Error Code
B1xx 4696
B1xx 4698
B1xx 4699
B1xx 469A
B1xx 469B
B1xx 469C
B1xx 469E
B1xx 469F
B1xx 8FF0

Scan Log Dump Progress Codes

Table 10. Scan Log Dump Progress Codes
Error Code
D130 xxxx
246
Service Guide
Description
System firmware interface failure
Firmware problem
Service processor firmware failure
System firmware interface
Firmware to I/O interface
Firmware to I/O interface
Service processor firmware failure
Service processor firmware failure
Informational message
Description
Scan log dump in progress
Action/ Possible Failing FRU
1. Check for system firmware
update.
2. Call service support.
1. Check for system firmware
update.
2. Call service support.
1. Check for system firmware
updates
2. Call service support
1. Check for system firmware
updates
2. Call service support
1. Check for system firmware
updates
2. System board, Location: P1 (See
note 3 on page 41.)
1. Check for system firmware
updates
2. System board, Location: P1 (See
note 3 on page 41.)
1. Check for system firmware
updates
2. Go to "MAP 1540: Minimum
Configuration" on page 57
1. Check for system firmware
updates
2. Go to "MAP 1540: Minimum
Configuration" on page 57
No action required
Action/ Possible Failing FRU
Informational message only. As the dump
progresses, the xxxx characters in the
display will change. When the scan log
dump is complete, the system may
reboot, depending on the reboot policy
settings.