Table of Contents
Advertisement
Table 9. Common Firmware Error Codes (continued)
Error Code Description
B1FD 001E Service processor recovery mode
B1FD 001F Bad firmware update diskette
Scan Log Dump Progress Codes
A scan dump is the collection of chip data that the service processor gathers after a
system malfunction, such as a checkstop or hang. The scan dump data may contain
chip scan rings, chip trace arrays, and SCOM contents. For more information on scan
dumps, refer to "Scan Log Dump Policy" on page 293.
The following table shows the error code produced by a scan dump.
Error Code
A1FF 3000
D130 xxxx
Eserver pSeries 630 Models 6C4 and 6E4 Service Guide
268
update fault
Description
Scan log dump request
rejected
Scan log dump in progress
Action/
Possible Failing FRU
Wrong firmware update diskette (Insert
correct diskette)
Replace diskette
Action/Possible Failing FRU
This is an informational message. The service
processor firmware was not able to perform a
scan log dump even though one was
requested.
Informational message only. As the dump
progresses, the xxx characters in the display
changes. When completed, the system may
reboot, depending on the reboot policy
settings.
Advertisement
Table of Contents
