Scan Log Dump Progress Codes; Problem Determination Generated Error Codes - IBM 6H0 Service Manual

Table 8. Common Firmware Error Codes (continued)

Scan Log Dump Progress Codes

Table 9. Scan Log Dump Progress Codes

Problem Determination Generated Error Codes

Table 10. Problem Determination Generated Error Codes
364
Service Guide
Error Code Description
B1FD 0016 Diskette read error
B1FD 001A Service processor recovery mode
update fault
B1FD 001E Service processor recovery mode
update fault
B1FD 001F Bad firmware update diskette
Error Code Description
D130 xxxx Scan log dump in progress
Error Code Description
M0BT 0000 The system hung during speaker
POST. This error code is generated
by the customer performing "Problem
Determination" in the RS/6000
Enterprise Server Model H80
Eserver pSeries 660 Models 6H0
and 6H1 User's Guide.
Action/
Possible Failing FRU
1. The firmware diskette may be
faulty. Try another diskette.
2. Replace the diskette drive.
3. Replace the primary I/O
backplane.
Location: U0.1-P1
Reset service processor (by
activating pinhole reset switch or by
disconnecting, then reconnecting
power)
Wrong firmware update diskette
(Insert correct diskette)
Replace diskette
Action/
Possible Failing FRU
Informational message only. As the
dump progresses, the xxxx
characters in the display will change.
When the scan log dump is
complete, the system may reboot,
depending on the reboot policy
settings.
Action/
Possible Failing FRU
Go to "MAP 1540: Minimum
Configuration" on page 113.