Installing The Printing System (Option) - Kyocera Mita KM-2530 Service Manual

1-3-11 Installing the Printing System (option)

Procedure
1. Remove 2 screws and take off the cover.
2. Push the printing system all the way in along
the rails, and fasten it with 2 screws.
Install the (optional) network printer board.
3. Remove 2 screws and take off the cover.
4. Push the network printer board all the way in
along the rails, and fasten it with 2 screws.
Screws
Figure 1-3-87
Printing system
Screws
Figure 1-3-88
Screws
Cover
Figure 1-3-89
Cover
Screws
Netwark
printer
board
1-3-43
2DF