Kyocera Mita KM-2530 Service Manual page 618

3DB
Maintenance
item No.
U605 Setting the continuous detection time for remote switching
(cont.) Sets the detection time when continuous detection is selected for remote switching. (This setting item will be
displayed, but the setting made is ineffective.)
1. Change the setting using the numeric keys.
Continuous detection time for remote switching
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Setting the initial condition of fax image scanning quality
Set to the resolution that is most frequently used by the user.
1. Change the setting using the numeric keys.
Display
1: S
2: F
3: SF
4: UF
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No. is
displayed.
U606 Setting the system (operation unit and display)
Description
Makes settings for fax transmission regarding the operation unit and display.
Start
1. Press the start key. The screen for selecting an item is displayed.
Note: Since this model does not provide LED error indicators, this setting has no affect on actual operation.
Display
ALARM LED OFF
DATE PATTERN
RESO. LOCK
DENS. LOCK
REPORT SKIP
REPORT ADD
PORT
Setting the conditions under which an error indicator turns off
1. Enter 1 or 2 using the numeric keys to change the setting.
Display
1: RESET
2: COMM
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
1-3-10
Description
Description
Description
Standard
Fine
Super fine
Ultra fine
Description
Sets the conditions under which an error indicator turns off.
Sets the date format.
Sets if the image scanning quality in fax mode is initialized.
Sets if the scanning density in fax mode is initialized.
Sets whether to skip unregistered abbreviated numbers
and one-touch key numbers on the list.
Sets used port entry in the activity report.
Description
An error indicator turns off only when the
reset key is pressed.
An error indicator turns off when any key is
pressed, an original is inserted or the next
transmission is started.
Setting range
0 to 255 (× 5 : ms)